Big Size 600Ah 30kWh 51.2V Stacked Floor Standing Home Energy Storage Battery
YH-ESS-BP600S16-MP&S-F stacked home storage system mainly includes battery modules, BMS modules, inverters, output interfaces, etc. It can store and release electric energy according to the requirements of the AC/DC inverter system, and supports the expansion of multi-module capacity . Combined with photovoltaics to form a household photovoltaic storage system, in one under the control of the body machine, the excess photovoltaic energy is stored in the battery, and when the photovoltaic energy is insufficient, the stored electricity is released to supply power to the load.
Features
1. Modular design, easy installation
Modular stacking design, convenient for users to install and use
2. Ultra-high protection, safe and worry-free
IP65 protection level, calmly cope with outdoor environment
3. Multi-mode seamless switching
There are 4 charging modes to choose from: solar only, mains priority, solar priority, hybrid charging
4. Uninterrupted power supply throughout the day
It has two output modes of mains bypass and inverter output, and has the function of uninterrupted power supply throughout the day
5. Support multiple parallel machines
Meet the needs of various household electrical conditions
6. Remote monitoring, keep an eye on
User-friendly design of the management platform, mobile phones and computers can log in freely to view real-time working status
7. Smart home energy management
Intelligently configure energy storage charging and discharging strategies according to electricity consumption habits, peak and valley electricity prices, and safety indicators to maximize comprehensive value
| No. | Item | Specifications |
| 1 | Cell | LiFeCoPO4 3.2V/50Ah |
| 2 | Number of modules | 6 |
| 3 | Picture | 
|
| 4 | Batteries configuration | 16S6P |
| 5 | Rated capacity | 600ah |
| 6 | Available capacity | 30.72kWh |
| 7 | Weight(Kg) | 255kg |
| 8 | Dimensions(L×W×H)
(mm) | 675×375×1200 |
| 9 | Rated voltage | 51.2V |
| 10 | Resistance | IR≤0.6mΩ |
| 11 | Charge voltage | 58.4V |
| 12 | Discharge cut-off voltage | 40V |
| 13 | Standard charging current | 0.25C |
| 14 | Standard discharging current | 0.5C |
| 15 | Max continuous discharge current | 1C |
| 16 | Communication interface | RS485 |
| 17 | Light | ALM / RUN / SOC |
| 18 | Cycle Life | 5000 cycles
(0.2C3 charge, 0.2C3 discharge, capacity) |
| 19 | Operating temperature | charging:0℃~55℃ ;
discharging:-10℃~55℃ |
| 20 | Storage temperature | 1 month: -20℃~45℃
1 year:0℃~35℃ |
| 22 | Relative Humidity | 65±20% |
| 23 | Delivery voltage | ≥48V |
| 24 |
Charge retention and capacity
recovery capability | After standard charging of the battery, it is shelved at room
temperature for 28d or 55°C for 7d, the charge retention rate is ≥90%,
and the capacity recovery rate is ≥90% |
Operating mode
The figure below shows the system application scenario of this product. A complete system includes the following parts:
1. Photovoltaic module: convert light energy into DC power, charge the battery through the all-in-one machine, or directly invert it into AC power to supply power to the load.
2. Mains power or generator: connected to the AC input terminal, it can supply power to the load and charge the battery at the same time. If not connected to mains
Or a generator, the system can also operate normally, and the load power supply is provided by batteries and photovoltaic modules at this time.
3. Battery module: The function of the battery module is to ensure the normal power consumption of the system load when the solar energy is insufficient and there is no mains power.
4. Household loads: It can be connected to various household and office loads, including AC loads such as refrigerators, lamps, TVs, fans, and air conditioners.
5. Inverter control integrated machine: the energy conversion device of the whole system.
6. The specific system wiring method is determined by the actual application scenario.
FQA
1. Should you keep LiFePO4 batteries fully charged?
Unlike lead-acid batteries, they need to be fully charged every day to keep the active material from sulfation. LiFePO4 battery does not need to be fully charged, so trickle charge and float charge are not necessary.
2. How many years will a LiFePO4 battery last?
Ten years. Roughly speaking, depending on the quality and type, your lithium battery can last anywhere from two to over ten years. More affordable lithium-ion batteries typically have between 500 and 3000 life cycles. While premium Lithium Iron Phosphate LFP batteries can last anywhere from 3500 to over 4000 cycles.
3. Which is better LiFePO4 or lithium battery?
The LiFePO4 battery has the edge over lithium ion, both in terms of cycle life (it lasts 4-5x longer), and safety. This is a key advantage because lithium ion batteries can overheat and even catch fire, while LiFePO4 does not.
4. What percent battery is best for storage?
Around 40 percent. Recommended storage is around 40 percent state-of-charge (SoC). This minimizes age-related capacity loss while keeping the battery operational and allowing for some self-discharge. Nickel-based batteries can be stored in a fully discharged state with no apparent side effect.
Product Tags:
|
|
16S6P 30kWh Lithium Battery Pack 600Ah 51.2V Home Energy Storage Battery Images
|
